Gryphon programmer screen is unreadable

[Jackpine]

And, it would be helpful to know if the Gryphon seems to function properly when plugged into Pegasus on a PC. This would let you know if the hardware is OK or not.

If it's just a firmware problem, then [Updates]->[Gryphon Update Manager] might fix things. However, the truck's PCM would have to be at the stock setting before you could do this. If that's not the case, Bill will have to be involved.

- Jack

[datrevino]

Originally Posted by JackandJanet

And, it would be helpful to know if the Gryphon seems to function properly when plugged into Pegasus on a PC. This would let you know if the hardware is OK or not.

If it's just a firmware problem, then [Updates]->[Gryphon Update Manager] might fix things. However, the truck's PCM would have to be at the stock setting before you could do this. If that's not the case, Bill will have to be involved.

- Jack

the truck is in level 3 performance because in that level was before the programmer failure.

So i think Bill has to be involve and i think the firmware is corrupt as Bill told another man with exactly the same problem.

Please let me know what Bill say about this and what i need to do next.

thanks.