Odd problem after chip install?

[cleatus12r]

Originally Posted by blue72

I have found several post where people had issues after a TS switch install and this fixed it.

This is the FIRST I've heard of a TS-Performance chip/switch assembly doing this and I've been around them for a while......

There is another company making chips that DOES have quite a few issues with this phenomenon (not really a problem, but it affects some vehicles).

[blue72]

Originally Posted by cleatus12r

This is the FIRST I've heard of a TS-Performance chip/switch assembly doing this and I've been around them for a while......

There is another company making chips that DOES have quite a few issues with this phenomenon (not really a problem, but it affects some vehicles).

Well, I can tell you for sure mine DOES. If I move the cable & knob towards the radio it gets FUZZY, if I move it away it clears up.

I finally picked up a choke today, I'll report back after I get it put on... I am confident this will take care of it.

[blue72]

Just a heads up. The choke helped my issue, I put two as close to the base as I could. They were $2.99 at Radio Shack BTW.