|
|
|||||||
| Upgrade your Evo (Disabled) Upgrade your Edge Evolution to a Gryphon Programmer to allow for custom tuning and additional functionality. Due to issues with the cable failures due to incompatible versions of firmware, we do not offer upgrades or tuning for the 1997-2003 F-Series gas or 7.3L diesel trucks. We recommend using another platform. |
|
|
Thread Tools | Display Modes |
|
|
|
#2
Mon, February 13th, 2012, 10:31 PM
|
||||
|
||||
it is one of those numbers, i believe a mix of letters and numbers 7 digits long. record all of those and I am sure someone can help
 , I dont have a CS or CTS so I can't help much.
|
|
#4
Mon, February 13th, 2012, 11:45 PM
|
||||
|
||||
|
record them all and post them, I think that either the firmware or calibration version are the codes you need... sorry I can't help more
|
|
#5
Tue, February 14th, 2012, 10:44 AM
|
||||
|
||||
|
On the CS, you click on: MENU►HELP►VEHICLE INFO It's not called "hex" code in the new programmers. I think it's called "calibration ECM" now.
Normally, it is a 7-character sequence like: RXCM5E4, which is what mine is. Yours will be different, but I think it will have the same "form". - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#6
Tue, February 14th, 2012, 10:56 AM
|
|||
|
|||
|
Sure enough.. there it is... YOU ROCK!!!
Now I'm not sure I have enough faith to order tunes.. I've been trying to contact PHP for 3 day via phone and email but get no responce... Guess they must be crazy busy...... |
|
#7
Tue, February 14th, 2012, 05:12 PM
|
||||
|
||||
|
You guessed correctly. I'm thinking they are only going to get more busy since they recently lowered the price on their phoenix chips and Edge has finally cleared up their latest issues with Fusion.
__________________
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
