![]() |
|
Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Based on Cleatus' advice I will go ahead and cut out the back of the black plastic PCM bracket and then reinstall the ground tab. Shouldn't take long and that should prevent the black plastic case from putting too much pressure on the chip which may cause issues with the PHP chip.
|
#2
|
|||
|
|||
![]()
Trust me, you'll want to cut the black plastic case. It WILL cause connection issues. I tried to get away without cutting a big hole and the chip didn't work cause the plastic was pushing the chip and causing no connection. I then removed everything again, cut the plastic and everything worked great. Glad it worked out that way, as I found out the tranny had upgrades so I needed to pull the chip to get it reburned and it made that task much simpler, as I now don't need to pull the entire PCM to get to the chip.
Now if Bill would just reburn that thing and get it back to me I'd be a much happier camper!!! Bill you out there!!! |
Thread Tools | |
Display Modes | |
|
|