I have a big problem!

[ticopowell]

It sounds to me like the torque converter might be bad, or not, that is my first guess but I don't know too much. hope that helps

[Longshot270]

Download the document in my sig. It is a PDF I made of trouble codes, causes and cures from information I got from Bill. It isn't a complete list but it does have information on nearly all of the codes.


Unfortunately P2106 doesn't come up in my list. Can you double check that code?

P0720 Output Shaft Speed Sensor Circuit Malfunction

P0720,"Insufficient input from Output Shaft Speed sensor.
--Description-- The output shaft speed sensor inputs a signal to the PCM, based on the speed of the output shaft of the transmission. The PCM compares this signal with the signal of the VSS or TCSS and determines correct tire size and axle gear ratio.
--Possible Causes--
- OSS sensor circuit short to GND
- OSS sensor circuit short to PWR
- OSS sensor circuit open
- Damaged OSS sensor
- Damaged PCM"

[spencerdrewh]

Originally Posted by Longshot270

Download the document in my sig. It is a PDF I made of trouble codes, causes and cures from information I got from Bill. It isn't a complete list but it does have information on nearly all of the codes.


Unfortunately P2106 doesn't come up in my list. Can you double check that code?

P0720 Output Shaft Speed Sensor Circuit Malfunction

P0720,"Insufficient input from Output Shaft Speed sensor.
--Description-- The output shaft speed sensor inputs a signal to the PCM, based on the speed of the output shaft of the transmission. The PCM compares this signal with the signal of the VSS or TCSS and determines correct tire size and axle gear ratio.
--Possible Causes--
- OSS sensor circuit short to GND
- OSS sensor circuit short to PWR
- OSS sensor circuit open
- Damaged OSS sensor
- Damaged PCM"

Thanks for your help! My dad owns a shop here in GA that I work at when I'm not away at school. I'm going to have our mechanic take a look at it on Monday. I'm hoping it's that sensor. Any idea what causes it to go bad?

P2106 is the code that my Gryphon read. It said "Throttle Actuator Control System - Forced Limited Power". From some of the other stuff I've been reading, I should check that speed sensor first and go from there.

[spencerdrewh]

Originally Posted by ticopowell

It sounds to me like the torque converter might be bad, or not, that is my first guess but I don't know too much. hope that helps

I sure hope it's not the torque converter! That'd be a nightmare haha.