Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer (Disabled)

Gryphon Programmer (Disabled)
Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.


 
 
Thread Tools Display Modes
  #1  
Old Wed, September 19th, 2012, 05:42 PM
tmsbandman tmsbandman is offline
tmsbandman
 
Join Date: Jul 2011
Location: Lawrenceville, GA
Posts: 22
tmsbandman is on a distinguished road
Default

Thanks both of you. I have already reduced Converter lock the max amount on 1-2, and 2-3. I had it way dow on 3-4, but I was having problems with downshifting at unusual times so I brought it back closer to center. My shift points are lowered by only 1 MPH. Maybe I'll try lowering it some more. If I do, should I keep the downshift points matched with the upshift ones?
  #2  
Old Wed, September 19th, 2012, 07:59 PM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
 
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default

Yes, they must be the same to avoid transmission confusion and trouble.
__________________
  #3  
Old Wed, September 19th, 2012, 11:28 PM
tmsbandman tmsbandman is offline
tmsbandman
 
Join Date: Jul 2011
Location: Lawrenceville, GA
Posts: 22
tmsbandman is on a distinguished road
Default

Oh yeah. You told me that on another post. I was studying the graph you posted. What are the units on the axes? I would guess MPH, and RPM, but I'm not sure.
  #4  
Old Thu, September 20th, 2012, 12:07 AM
Longshot270's Avatar
Longshot270 Longshot270 is offline
Forum Predator
 
Join Date: Jul 2009
Location: DFW, TX
Posts: 1,878
Longshot270 will become famous soon enough
Default

Quote:
Originally Posted by tmsbandman View Post
Oh yeah. You told me that on another post. I was studying the graph you posted. What are the units on the axes? I would guess MPH, and RPM, but I'm not sure.
The graph is actually multiple graphs overlaid upon each other. The X axis is time from the start of recording. The Y axis is just a scale where the individual graphs must be multiplied or divided by factors of 10 to match. Or in other words, just the red line is MPH with the graphed line being 10x of the true value. The green line is 1/10 of the true RPM.
__________________
  #5  
Old Thu, September 20th, 2012, 02:33 PM
tmsbandman tmsbandman is offline
tmsbandman
 
Join Date: Jul 2011
Location: Lawrenceville, GA
Posts: 22
tmsbandman is on a distinguished road
Default

Ahh... Makes sense. Will study it some more tonight. Thanks again.
  #6  
Old Tue, September 25th, 2012, 06:51 AM
60DRB's Avatar
60DRB 60DRB is offline
truck # 3
 
Join Date: Jun 2010
Location: East LA
Posts: 32
60DRB is on a distinguished road
Default

MPG is all about driving habits. The headwind is an aerodynamic issue (drag) and definately makes a difference. With my 2006 4.6 4x4 SCAB 6.5' bed at about 200' MSL, I find I get the best mileage at an effective 55-60 mph (accounting for any/no headwind). About 19 mpg if traffic cooperates. Increase speed above 65 mph and mpg drops about 3-4. Add a light trailor and the road friction (extra tires) comes into play-drop 2 mpg. Sitting at lights in town traffic...is like pouring gas onto the road while idling. Makes me want to scream as mpg drops to around 9-10. Strangely (or maybe not) my truck responds best to moderate acceleration to cruise speed rather that a slow acceleration. This is using the canned 87 tow tune.

I drove a friends 2005 5.4 2wd SCAB 5.5' bed this summer at higher elevations, (2000-4800' MSL) and saw very similar results. No tuner on his truck and it felt like a wallowing pig compared to mine.

I also tried running a three consecutive tanks of no-ethanol gas as an experiment. Despite theory on energy potentials of ethanol blend vs pure gas, my actual results showed no difference whatsoever in my mpg.
 

Tags
advance, timing

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:49 AM.


All Contents Copyright 2008-2024, Power Hungry Performance