Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford F-150, Expedition, Navigator, Blackwood, Mark-LT, SVT Lightning and H-D Editions (Disabled) > 2004 to 2008 F-150 and Mark-LT

2004 to 2008 F-150 and Mark-LT
4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old Fri, March 20th, 2009, 11:43 AM
txarsoncop txarsoncop is offline
Whopper
 
Join Date: Mar 2009
Location: Texas baby!
Posts: 23
txarsoncop is on a distinguished road
Default

There is "straight" sewer pipe that is schedule 20 PVC, usually used for septic systems. It's gonna half to 2/3s thinner than schedule 40 and much more flexible. It may be flexible enough to squeeze into the oblong shape in the inner fenders. If it couldn't be squeezed into fitting in the hole you wouldn't have enough material to shape it into fitting though.

Ya'll gotta keep in mind that these Lowes, Home Depot folks generally aren't "from the trade" so they might not be familiar with the products and/or what their intended purposes are.

FWIW, my local Lowes had the PVC test caps that AgentOrange used in his build. I used a 2" and a 1.5" test cap. Need to go back and get a 1" plug for the other hole.

I'll post a couple of pix when i get the plug but I've trimmed the rims off the caps & I'll do the same to the plug along with cutting it short so it doesn't project so far into the intake's air stream. Gives it a pretty clean look.

bill
the new guy

Last edited by txarsoncop; Fri, March 20th, 2009 at 11:41 PM. Reason: Plug size needed to be smaller...
Reply With Quote
 

Tags
dwv intake mod

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:42 PM.


All Contents Copyright 2008-2024, Power Hungry Performance