|
Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
emulator question
does minatour software support the moates emulator?
and if it does, does that mean that I could download a superchip tune to my pcm and then use the emulator to modify it and then upload it back to flashpac and have my own custom tune? or any other brand etc.
__________________
E99 F350 , Magnaflow 4" Exhaust , AFE Stage 2 Cold Air, 3.73 Gears, Stock Tires , Transgo Tugger HD2 Repro. Kit with non-pwm apply valve , Landis Triple Disc Low Stall TC manual tc on/off switch, Deep Trans Pan, TS Chip waiting on PHP Tunes, TS Chip Burner. |
#2
|
||||
|
||||
I noticed today on your site that it will support moates emulator soon. any word on when that update will be available.
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles Intake, Exhaust, 6.0L IC, 4 Wheel Disc Brakes. Dana 60, Electric Fuel, SD HPOP, 6" Miter cuts, 3" plenums Rosewood Stage IIs, Built tranny. Minotaur with some tunes from Bill Planning: Traction bars, HPOP, Nitrous?? |
#3
|
|||
|
|||
So what emulators are you guys using? Is it a specific one to run with this software that only Bill can supply or are there others out there that work with the software?
|
#4
|
|||
|
|||
Would also like to see any answer here! ^^^
__________________
96' f350 on 35's stage 1's, custom tuned, built tranny, IC, modded IDM |
#5
|
||||
|
||||
It's on the website:
"We will also continue to support the existing XTronics Romulator emulators as well. |
#6
|
|||
|
|||
Talked with Bill yesterday. Sounds like some bugs are being worked out on the 4 bank and then it will be released
I am going to hold off until that is available, would make things so much easier!
__________________
96' f350 on 35's stage 1's, custom tuned, built tranny, IC, modded IDM |
Thread Tools | |
Display Modes | |
|
|