Tune Advice for KC300X Stage 1 Turbo and CNC 160/0 Injectors

[asajay]

Thank you for that advise to try what I have, it may work. I'm still a day or two from completion and firing it up.

Further information if helpful.

I purchased the Hydra Chip in 2017 and the tune package is VDAB0_02.
It would be nice to see a complete listing of all the available tunes if it were available. That is without having to plug into a live system. I'm still putting the wiring back together in the front end after having re-installed the radiator core support.

I printed the current tune list way back when I first programmed it. The list is:
01 - Server File: VDAB0_02: 65 HP - Daily Driver
02 - Server File: VDAB0_02: 80 HP - Daily Driver
03 - Server File: VDAB0_02: 65 HP - Performance
04 - Server File: VDAB0_02: 80 HP - Performance
05 - Server File: VDAB0_02: 80 HP - Towing
06 - Server File: VDAB0_02: 65 HP - Towing
07 - Server File: VDAB0_02: 40 HP - Towing
08 - Server File: VDAB0_02: 25 HP - Towing
09 - **BLANK**
10 - **BLANK**
11 - **BLANK**
12 - **BLANK**
13 - **BLANK**
14 - **BLANK**
15 - Server File: VDAB0_02: 0 HP - Whisper Mode

My Box Code is S0D4 and it was updated in 2017 by Bill Cohron before sending back to me.

Also thank you for the note about EGT. I had thought of putting in a gauge and I think you've convinced me I should. No, I do not have an Intercooler installed, that just seemed like one step too far. At least for now.


Thank you,
Asa Jay