Gryphon issues

[Jackpine]

Good on you for posting the Vista instructions, xthorxz400. I probably should have done it, but when he said he'd gone through, "the troubleshooting in the instructions for Vista", I thought maybe he'd taken care of that problem. Of course, that could easily be the problem as well.

- Jack

[dsilva584]

Originally Posted by JackandJanet

Good on you for posting the Vista instructions, xthorxz400. I probably should have done it, but when he said he'd gone through, "the troubleshooting in the instructions for Vista", I thought maybe he'd taken care of that problem. Of course, that could easily be the problem as well.

- Jack

woops i didn't even see he put that lol dang that speed reading!!!oh well mab the screen shots will help I had this problem and had to use this fix is the only reason why i posted that lol

well in that case try this MACH

bring up your run command by going to start then clicking on run...next type in devmgmt.msc and click ok...this will bring up your device manager...click on the + sign next to "universal serial bus controllers" and you should find your gryphon listed in here "i think it is USB controllers" I will let you know for sure later ....anyhow you should be able to find your gryphon somewhere in the device manager when it is plugged into your computer....once you find your gryphon try to right click and reinstall the driver for it (the driver came with the software you downloaded from PHP)....if you have ever had a "edge" installed on your computer it will almost always come up with the driver for the edge so look for that also...if that is the case right click and uninstall the driver for the edge. when it asks you to delete the driver click yes....you will then need to unplug and replugin your gryphon....you should be able to install the driver that came with the php software. If that doesn't fix your problem try another usb port on your computer or another usb cable. If that does not work go lowes and get the biggest hammer they have.....next take your computer outside and smash it 2 hell...orrrr you could contact PHP...id go with the hammer!!

ps sometimes it helps to disconnect and reconnect your gryphon when looking for it in the device manager

[machx4]

xthorxz400

You hit the nail on the head. The computer was seeing it as an edge product. As soon as I deleted the edge items. It worked just like it was supposed to.

Thanks for the information You rock!

Now to program the truck!

[Jackpine]

Super work, xthorxz400! (I don't waste these smileys on just anyone)!

VERY clear instructions on how to get rid of the conflicting driver - I'd totally forgotten about that possibility. I'm delighted you got him going again, leaving Bill to do more important stuff.

This is how forums SHOULD work, isn't it?

- Jack

[dsilva584]

Originally Posted by JackandJanet

Super work, xthorxz400! (I don't waste these smileys on just anyone)!

VERY clear instructions on how to get rid of the conflicting driver - I'd totally forgotten about that possibility. I'm delighted you got him going again, leaving Bill to do more important stuff.

This is how forums SHOULD work, isn't it?

- Jack

haha yep bill keeping busy = me getting my custom tune faster plus it gives me something to do when i am at work and i think ill have one with you

tell how how the custom tune feels MACH!!and what tune did you get?

[machx4]

I only got a chance to drive it a few miles out of town last night with the 87 performance tune loaded. I did notice better throttle response right off. There is also less drone when I accelerate from my CAI. I will give a more detailed write up when I get it out on the road for a longer trip.

My custom tunes are as follows:
87 performance tune
87 tow tune
e-85 performance tune