|
|
|||||||
| Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
|
|
Thread Tools | Display Modes |
|
#16
Wed, April 15th, 2009, 09:10 PM
|
||||
|
||||
DJ,
How about you use that fancy AE package you have and put it to use!  Here's what you do. 1. Drive in 3rd gear at 45 MPH; no load, not accelerating. Check the Mass Fuel Desired by what the datastream says. 2. Same test...only in 4th gear. 3. Use the MFD data and calculate over time and engine speed. 4. It's not the most accurate, but it may give you an idea. I have a Genisys sitting here, but it's cold and snowing out. 
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode