|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, April 16th, 2009, 09:25 AM
|
||||
|
||||
If your transmission is not "standard", then the canned tunes in an Edge would probably NOT work well. But, assuming Bill knows this transmission, he should be able to write custom tunes for you.
It's probably a simple yes/no response that PHP could answer by email or PM. - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#2
Fri, April 17th, 2009, 03:47 AM
|
||||
|
||||
|
To the best of my knowledge, we've not had any issues on a 7700 version F150. However, if for some reason we do not have the calibration natively supported in the programmer, we can always add it in as a downloaded update.
Hope this helps.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#3
Sat, April 18th, 2009, 04:16 PM
|
|||
|
|||
|
Yes it does, thanks!
|
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
