Still cant figure it out.....

[twintips_17]

Jack,

I have always turned everything off. I shut the doors, and program everything without even leaving the truck. I didn't change anything. I went straight down and hit the load previous settings. In the past i have tried just making simple changes. I would just load a tire change and it will give me wierd outcomes. I owuld leave all the shift points and timing untouched but yet it will always give me a rough idle.

I have only done hte Previous options thing once. Every other time I try to do a custom tune. I have yet not been able to make any changes to a tune.

Period.

This is what i have tried in the past from day one with gryphon. Every tune.

1.) Loaded 91 performance....

Wouldn't run. Would start and then just die....

2.) Loaded Tow tune with timing advanced 2.0.

Ran but was rough.

Had to get home so i tried a tune without changing things.

3.) Loaded stock tow tune.

Worked great. Was better then changed Canned tune on edge.

I then ran this for about a week.

4.) Tried tow tune with just the tire change.

Read in manual to cross referance size. I put it in. Hit done. Rough idle.

5.) Went back to tow tune.

Ran 87 tow tune on 91 gas for 2 months.

Decided to have some fun and try the 91 tune again.

Loaded and started. Ran great. Did my runs.

Went back to tow tune.

6.) Loaded tow tune.

ONLY change was advancing the timing +2.0 for 91 octane fuel.

Rough idle.

Went back to canned 87 tow tune.

Thats where i am now.


Sorry if it is so long. But that is a step by step of the last 2.5 months since i have had my gryphon.

I had my edge for 3 years and never once had a problem programming it. The steps are the same for the gryphon, so i would assume we could rule that out.

I will try to change the click rate and see if that helps. I hope it does.

Thanks
Nate

[Jackpine]

Thank you Nate - I finally understand, I think! :o Sorry it took me so long.

As long as you do not try to apply any Custom Options, things are fine - does that about sum it up?

Of course this is way above my limited knowledge of the Gryphon and I suspect there COULD be a problem in the firmware of the unit. I'm sure Bill can correct this, once he finds the time to get back to you. We've alerted him through the moderator's network about this so it hopefully won't get lost in the "shuffle".

As you know, Bill and Corey are possibly out of touch since they're on a live tuning trip, so it may take a couple of days for them to get back to you. Hang in there!

- Jack

[twintips_17]

Originally Posted by JackandJanet

Thank you Nate - I finally understand, I think! :o Sorry it took me so long.

As long as you do not try to apply any Custom Options, things are fine - does that about sum it up?

Of course this is way above my limited knowledge of the Gryphon and I suspect there COULD be a problem in the firmware of the unit. I'm sure Bill can correct this, once he finds the time to get back to you. We've alerted him through the moderator's network about this so it hopefully won't get lost in the "shuffle".

As you know, Bill and Corey are possibly out of touch since they're on a live tuning trip, so it may take a couple of days for them to get back to you. Hang in there!

- Jack

Thats what i think it might be. And yes you are correct in saying that "ANY" custom option throws it into a rough idle. I dont know how they drive but i cant imagine it any better than the rough idle. It feals like it runs on 4 cylinders.

Anyways. Like i said i should be getting my custom tow tune from them soon.... So its not to important of a problem but none the less it still isn't great. There are times i really need to change some of the options.

Thanks Jack for you help once again.