|
|
#171
Mon, March 23rd, 2009, 03:29 PM
|
||||
|
||||
Start a thread in prayer requests, and may be and you'll get more!
Just kidding! I think you get one anyway with the gryphon and some awesome mints! Sorry for the tangent. Lars
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. 
|
|
#172
Wed, March 25th, 2009, 01:11 AM
|
|||
|
|||
|
Ok here's pix of mine, complete with very dirrrrrty engine compartment:
 I used a 2" test/knock out cap, 1.5" test/knock out cap and a 1" plug. Another shot:  The "ring" you can see on the far end of the PVC is about 1" of a 3" coupling. There's no need to use a whole coupling for an application like this. I didn't even glue it. I shaped the 2" of pipe that protrude into the fender and still had to beat the "bit-o-coupling" onto the pipe. Trust me, it ain't moving. I had cut the coupling to match the Downspout Connector but then decided I didn't want to use the DC. Used the coupling anyway because it looked cleaner than my shaping job and I'm keeping an eye out for a suitable sealing material to go between the "bit-o-coupling" and the fender. Partly for a more factory look, partly for grins and partly out of OCDness...  Sawzall really effed up part of the tubing, the guard scratched it up some... ach well. Maybe some other day I'll work on cleaning that up. Fixing that will mean smoothing the whole thing though.
__________________
bill 2005 Screw 4x4 Lariat - mostly stock 1964.5 Mustang - not stock 
|
|
#175
Thu, March 26th, 2009, 07:02 PM
|
|||
|
|||
|
I've usually done it for a minute. It's been posted that for this mod it's not really necessary though, unless you've done a bunch of other stuff at the same time.
__________________
bill 2005 Screw 4x4 Lariat - mostly stock 1964.5 Mustang - not stock
|
|
#176
Thu, March 26th, 2009, 07:34 PM
|
||||
|
||||
|
I disconnected the battery for a few minutes after I did mine. But now I realize there was no point in doing so. There's really nothing new for the PCM to "relearn".
- Jack
|
|
#177
Thu, March 26th, 2009, 07:39 PM
|
||||
|
||||
|
Txarsoncop - I really had to laugh when I saw your nice shiny CAI in your "camouflaged as a desert" engine bay!
 Kind of like wearing shorts with cowboy boots and a cowboy hat.  But, the intake sure is purty!  - Jack
|
|
#178
Thu, March 26th, 2009, 08:46 PM
|
|||
|
|||
|
Quote:
I knew someone would say that before to long...but hey its a good way to tell where the new addition is. 
|
|
#179
Thu, March 26th, 2009, 09:52 PM
|
|||
|
|||
|
So....though I could toss this in there. Sorry if it needs to be elsewhere but with the intake creativity you guys have it moght fit in.
Took some pics of the 09 intake...    Interesting setup...it's got some mod possibilities for you engineering masters eh.
__________________
|
|
#180
Fri, March 27th, 2009, 01:10 AM
|
||||
|
||||
|
Interesting they went back to a remote filter box?
Lars
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
 |
| Tags |
| dwv intake mod |
| Thread Tools | |
| Display Modes | |
|
|
Flowmaster 40, PHP Gryphon, AS 2" kit
Linear Mode
