![]() |
|
|||||||
| 2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
![]() |
|
|
Thread Tools | Display Modes |
|
#11
|
||||
|
||||
|
Quote:
Some other have tried champions or autolites and ended up doing them again after 10k-20k.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#12
|
|||
|
|||
|
Will do! Thanks 88.
__________________
2.5 HBS Level Kit, Magnaflow SI/DO, PHP Gryphon, AEM BruteForce |
|
#13
|
||||
|
||||
|
i never thought of this before, would this effect my new motor in my truck that i swapped since it is a 2003 5.4l 2v ? it had originally the cop ignition black boots before i swapped to coil system. i have not changed them as of yet since i am waiting for my tunes first. But shortly there after this is since i do not know when or if they were ever changed in this vehicle originally. it had only 38,000 km on engine when i bought it a month ago
__________________
When the going gets tough slap it in 4wheel high and plow through the junk!
Last edited by 88Racing; Sat, December 12th, 2009 at 11:40 PM. Reason: Hit edit by accident |
|
#14
|
||||
|
||||
|
Quote:
That's why this is posted in the 04-08 section. If you have a 5.4 2v then this tsb does not apply. You just have to make sure you torque yours right so they don't loosen up and pop out.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#15
|
||||
|
||||
|
Quote:
- Jack
__________________
2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#16
|
||||
|
||||
|
Quote:
Paying for plug extraction. Or. Paying for the install of time serts.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#17
|
||||
|
||||
|
ok great thanks for the heads up with the torque, its usually 25lbs right?
__________________
When the going gets tough slap it in 4wheel high and plow through the junk!
|
|
#18
|
||||
|
||||
|
On your applicaction 03 5.4 2V that sounds about right.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#19
|
|||
|
|||
|
Sorry if I am covering a previously covered topic but I am new to F-150's. I just got a 2007 F-150 with a 4.2 v-6 and a manual tranny. I assume from what I have read that I do not have to worry about the "stuck/broken" plug or the plub ejecting from the housing. Am I correct in this?
Thanks. |
|
#20
|
||||
|
||||
|
Quote:
This is for 5.4L 3V motors. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|