|
|
|||||||
| 1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Thu, January 12th, 2012, 08:17 PM
|
||||
|
||||
Thoughts on a Zombie intake?
https://www.facebook.com/pages/Zombi...94218003943091
I found this, forgot where, but I thought I would get everyone's opinion on it. It seem to me to be a good deal, and the powdercoating is nice, but worth getting? I don't know. 
|
|
#2
Fri, January 13th, 2012, 12:18 AM
|
||||
|
||||
|
Looks like every other "filter-on-a-tube" out there.
Someone selling a commonly-made (and easy to make) intake. It's not going to help anything unless your factory intake box is letting dirt pass through the lid joint.
|
|
#3
Fri, January 13th, 2012, 12:23 AM
|
||||
|
||||
|
Thanks, I need to replace my air filter sometime soonish, it is getting dirty, so I am looking at options, I think I will just go with a stock filter.
|
|
#4
Fri, January 13th, 2012, 12:40 AM
|
||||
|
||||
|
Be sure to get the Motorcraft filter from Ford. The WIX (NAPA/CARQUEST) filters do not seal between the lid and lower section of the airbox. As a matter of fact, if you want my "DIY 6637" intake, I'll just send it to you. It needs a new filter, but you can have it if you want it. It's simply a piece of 4" exhaust pipe.....
|
|
#5
Fri, January 13th, 2012, 03:37 AM
|
||||
|
||||
|
I don't think I can say no to that... I don't really have an address yet, well not until the 24th of january, so it is hard to get anything in the mail. Ill send you my new address as soon as I have it. Thanks!
 , and how much are the filters to replace?
|
|
#6
Fri, January 13th, 2012, 10:18 AM
|
||||
|
||||
|
I don't know how much the filters cost a lay-person....
I get them for cost through NAPA (it's not who you are, it's who you know) and I think I pay $38 each.....but they tend to last longer than the regular box filters because of the surface area. The only thing that I need you to make sure of is that your intake system currently looks like this (not mine, it's too dirty)  :
|
|
#7
Fri, January 13th, 2012, 01:48 PM
|
|||
|
|||
|
Here's where I get my 6637 filter... $29 list price plus shipping.
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
|
|
#8
Fri, January 13th, 2012, 02:07 PM
|
||||
|
||||
|
You can do that too!
|
|
#9
Sun, January 15th, 2012, 09:55 PM
|
||||
|
||||
|
yup, mine looks exactly like that, I just got 2 new batteries, motorcraft, thanks dave, and I took that plastic cover off so it really looks exactly the same. as soon as I have a good address to ship to I will get the filter and have you ship that to me. Thanks a bunch!
|
|
#10
Sun, January 15th, 2012, 09:56 PM
|
||||
|
||||
|
Should I worry about getting a cover for it? IDK what they would do, but I am in texas so it might get dusty sometimes...
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
