|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Sun, June 3rd, 2012, 03:20 PM
|
|||
|
|||
|
new member ?
i want to program my ficm. im not sure what to order. i don't want a rental. i all ready have a sct sf3. what to i need to order.
Order a 2003-2007 6.0L PSD Gryphon, CS, or CTS or Order 2003-2007 6.0L PSD Calibrations for a Gryphon/Evo, CS, or CTS or Reprogram a 6.0L PSD FICM or Purchase a FICM Programmer with all Four Calibrations thanks in advanced 
|
|
#2
Tue, June 5th, 2012, 12:23 AM
|
||||
|
||||
I would buy the FICM programer so you can change tunes and use it as your digital gauges. You already have an SCT so you can use that for the ECM and TCM tuning as needed.
__________________
19 F-350 6.7 Auto 16 F-350 6.7 Auto 05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM) 00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3 95 F-Superduty 7.3 DI, Auto, Mechanics Truck 94 F-Superduty 7.3 DI, 5 speed, Flatbed
|
|
#4
Sun, July 15th, 2012, 08:50 PM
|
|||
|
|||
|
New member with lots of questions
I have 2005 f250 6.0 with a banks Eco tuner, air box,and inter cooler. I don't know much about FIMC or how it works in conjunction with the banks tuner. I just had mine replace by ford under warrenty I tow a trailer in the mountains most times around 12000 lbs.What will reprogramming do for me in my situation. I also am not familiar with certain terms such as ECM roll back or PCM programming
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
