![]() |
|
F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
got my FU day before yesterday, got it installed issue free.
I have it loaded with whisper mode in slot 1, the 65 and 80 DD followed by three tow tunes. the issue I have is it romps real hard for a second when switching to whisper and then will die when switching back to 65DD. I get a CEL and the water in fuel light when switching in AND out of whisper and have had it die once when switching to one of the tow tunes. I have looked for a code with my AE but nothing was set. I notched the back of the case and checked all the pins on the PCM with my DVM for continuity to make sure they where clean...chip is held in with some gorilla tape....all six slots are loaded with a tune... i haven't tried re flashing the chip yet but may do that later today. any ideas? thanks, Steve
__________________
Steve 2000, F350. CCLB 4X4 and surprise surprise.....it's white ![]() |
|
|