|
Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
manual shifting with chip
Ok, Id like to make a shifting tune where exampe Position 1 is 1st 2 is 2nd and so on. So I'm guessing on transmission test gear select you pick what gear and on trans test switch you have to have it as 1 for on?
Also how do you disable the TC lock? as i would like to be able to control it manually with my hand switch and not have it on the tune. I beleive this will make it easier for me to drive/tow with my larger setup, instead of having to pull the shifter down into 2nd and lock the switch I can just flip through the gears with the tune and lock as needed with my switch. Also i may set it up that i can control the shift on the track with the sled with my tune so i can go from 1st into 2nd and not have to worry about it hitting 3rd and dieing out. |
#2
|
||||
|
||||
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory! |
#3
|
|||
|
|||
Quote:
|
#4
|
|||
|
|||
figured it out - dumb question
Last edited by Shaw; Fri, August 26th, 2011 at 03:26 PM. Reason: dumb question |
#5
|
|||
|
|||
wow, after rereading this thread I realized it might look like I am saying mustangs original post was a dumb question. I should have said in my post that my question was dumb but I figured it out and deleted the post.
I just didn't want any confusion towards Mustang. |
|
|