Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > 6.0L PSD FICM Reprogramming

6.0L PSD FICM Reprogramming
Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years.

If you have questions or would like more information about the benefits, please post here.


Reply
 
Thread Tools Display Modes
  #1  
Old Sun, October 23rd, 2011, 11:16 PM
marcakuhn marcakuhn is offline
Whopper Junior
 
Join Date: Feb 2010
Posts: 2
marcakuhn is on a distinguished road
Default FICM Reprogramming & ECM Rollback lost MPG HELP!?

I took a trip with only the Edge CTS Programmer set on the performance canned tune and got 16 at 75 mph which i was pretty happy with. However I recently Rolledback my ECM/TCM along with the FICM and now can barely get 10 mpg on the highway!? I cleaned EBP Sensor and tube with no result so I replaced the sensor and again getting about 9-10 mpg on the highway at 70 mph. Anyone suggest anything else that may be wrong with the truck??
Reply With Quote
  #2  
Old Mon, October 24th, 2011, 10:10 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 206
Jeremy is on a distinguished road
Default

What year is the truck? model? srw drw? etc etc

Are these hand calculated mpg figures?

Were you towing?

What did it get before the edge was installed?
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
  #3  
Old Tue, October 25th, 2011, 10:51 PM
marcakuhn marcakuhn is offline
Whopper Junior
 
Join Date: Feb 2010
Posts: 2
marcakuhn is on a distinguished road
Default

The Truck is a 2007 f250 SRW all stock except PHP FICM, PHP rollback VXCF4, Edge Programmer set on performance setting always

This is no towing and its mixed highway/City driving. Everything is hand calculated for mpg.

Before the Edge was installed I would see 14 at the very very best.

After Installation of the Edge set on the performance setting I was getting 16 at 75 mph. Cruise was set the entire time for 380 miles.

After PHP FICM my mileage stayed about the same (15.5 mpg) and only ran one tank through before I performed the rollback to VXCF4. My mileage then seem to go downhill overnight after that. The best I have seen is 11.4 mpg after running 3 tanks through.

Is there other sensors I should check? No lights on the dash. Gonna swithch to synthetic oil tomorrow see if that helps at all.
Reply With Quote
  #4  
Old Wed, October 26th, 2011, 10:17 AM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 206
Jeremy is on a distinguished road
Default

Whats the MPG with the roll back and set to stock? Perhaps there is something in the canned edge tunes and don't jive with vxcf4?

Also where do you live? Have they switched to winter blend fuel?
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:03 AM.


All Contents Copyright 2008-2024, Power Hungry Performance