|
|
|||||||
| F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Tue, February 21st, 2012, 02:06 PM
|
|||
|
|||
Just got my FU chip. 2 quick qestions
1. Should I start the truck in a Stock Tune setting or is it OK to start in the other tunes? Any I should avoid starting in?
2. Install the software on a Laptop or Desktop? I have the option to install on a new-ish desktop or an older laptop. I plan on cutting the PCM cover so I can easily remove the chip. The Desktop is the better of the computers. Would it be of a benefit to be able to reflash the chip while on a trip from my laptop without access to my desktop or is this something that really I'd never do? Maybe in an emergency? I guess I could always pull the chip and go back to stock. thanks, Bryce
__________________
 2001 Ford F-250 SuperDuty CCSB 7.3 PSD - HD 4R100, MBRP 4" XP Series Exhaust w/ Muffler, PHP FU Chip, AIS Severe Duty Intake, Zoodad, Fumoto Oil Drain Valve, 285/75R16E BFG AT KO, Pioneer AVIC-Z130BT In-Dash Nav, BOYO VLT-422C Back Up Camera, Scangauge II, GLoqshift 3 Gauge Pod (EGT,TFT,Boost) Dyno'd at PHP 2/11/12 - 242rwhp / 504rw ft-lbs <<<--- before the FU Chip on stock PMT3 tune |
|
#2
Tue, February 21st, 2012, 02:23 PM
|
|||
|
|||
|
Quote:
__________________
2001 Ford F-250 SuperDuty CCSB 7.3 PSD - HD 4R100, MBRP 4" XP Series Exhaust w/ Muffler, PHP FU Chip, AIS Severe Duty Intake, Zoodad, Fumoto Oil Drain Valve, 285/75R16E BFG AT KO, Pioneer AVIC-Z130BT In-Dash Nav, BOYO VLT-422C Back Up Camera, Scangauge II, GLoqshift 3 Gauge Pod (EGT,TFT,Boost) Dyno'd at PHP 2/11/12 - 242rwhp / 504rw ft-lbs <<<--- before the FU Chip on stock PMT3 tune |
|
#3
Tue, February 21st, 2012, 03:28 PM
|
|||
|
|||
|
Quote:
__________________
2001 Ford F-250 SuperDuty CCSB 7.3 PSD - HD 4R100, MBRP 4" XP Series Exhaust w/ Muffler, PHP FU Chip, AIS Severe Duty Intake, Zoodad, Fumoto Oil Drain Valve, 285/75R16E BFG AT KO, Pioneer AVIC-Z130BT In-Dash Nav, BOYO VLT-422C Back Up Camera, Scangauge II, GLoqshift 3 Gauge Pod (EGT,TFT,Boost) Dyno'd at PHP 2/11/12 - 242rwhp / 504rw ft-lbs <<<--- before the FU Chip on stock PMT3 tune |
|
#4
Sat, February 25th, 2012, 02:59 PM
|
|||
|
|||
|
I got my chip in this afternoon. It's awesome! Really woke my truck up.
I need to come run it on the dyno again. I'll see about coming to the shop at the next dyno day.
__________________
2001 Ford F-250 SuperDuty CCSB 7.3 PSD - HD 4R100, MBRP 4" XP Series Exhaust w/ Muffler, PHP FU Chip, AIS Severe Duty Intake, Zoodad, Fumoto Oil Drain Valve, 285/75R16E BFG AT KO, Pioneer AVIC-Z130BT In-Dash Nav, BOYO VLT-422C Back Up Camera, Scangauge II, GLoqshift 3 Gauge Pod (EGT,TFT,Boost) Dyno'd at PHP 2/11/12 - 242rwhp / 504rw ft-lbs <<<--- before the FU Chip on stock PMT3 tune |
|
|
Linear Mode
