Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > General Vehicle Related Topics > Performance Modifications and Other Conversations

Performance Modifications and Other Conversations
This is a place where we can have real, honest discussions about all things performance related.

Whether it's power adders, engine parts, configurations, injectors, tuning, or whatever else you can thing of, let's talk about it!


Reply
 
Thread Tools Display Modes
  #1  
Old Fri, July 1st, 2022, 10:00 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,654
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default FE 360 Performance

Oxymoron: 360 Performance

Here I am, building another engine for somebody. Whoopee.

It's a family friend, a guy a few years older than me. His dad recently died (one who gave me the 74 F250 I put a 4.6 in). The dad built a "buggy" of sorts and the son wants to restore it and have the engine rebuilt. For what it is and the severely limited use it will see, I didn't want to waste a good 390 crankshaft and set of rods......

To be continued....
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
  #2  
Old Sat, July 2nd, 2022, 11:50 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,654
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Just to throw some numbers out there since math is fun....

FE deck height - 10.170"
360 Rod length - 5.540"
1/2 stroke length - 1.750"
Piston compression height - 1.760"

Deck clearance - 0.120" in the hole. GARBAGE!

Unfortunately, most blocks (this one is no exception) need more than a 0.010" overbore for wear which puts a guy out of the realm of using a 352 piston since the largest size available is 4.060" and the 360 starts at a 4.050" bore stock. A 352 would be fine with me as the compression height of the piston is higher, affording a better quench and higher compression (1.816 CH). This WOULD get deck clearance to about 0.060" or so. BETTER.......

What is Cody the mad hatter doing? Getting Dodge 340 pistons, that's what. Certain years had floating wrist pins (like the FE) and I SHOULD be able to go an extra 0.009" on the small end bushing. If there's no balancing problems due to weight, I'll have a 0.030" overbore (4.080") with 0.040" oversize 340 pistons.....and the best part....a 0.050" deck clearance. The static compression ratio will go from about 7.85:1 to almost 9.0:1 with much better quench and I can get away with a more "sporty" cam and not completely kill the cylinder pressure.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
  #3  
Old Tue, July 5th, 2022, 10:29 AM
Power Hungry's Avatar
Power Hungry Power Hungry is offline
The Godfather of Power Stroke Tuning
 
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,263
Power Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud of
Default

Quote:
Originally Posted by cleatus12r View Post
Just to throw some numbers out there since math is fun....

FE deck height - 10.170"
360 Rod length - 5.540"
1/2 stroke length - 1.750"
Piston compression height - 1.760"

Deck clearance - 0.120" in the hole. GARBAGE!

Unfortunately, most blocks (this one is no exception) need more than a 0.010" overbore for wear which puts a guy out of the realm of using a 352 piston since the largest size available is 4.060" and the 360 starts at a 4.050" bore stock. A 352 would be fine with me as the compression height of the piston is higher, affording a better quench and higher compression (1.816 CH). This WOULD get deck clearance to about 0.060" or so. BETTER.......

What is Cody the mad hatter doing? Getting Dodge 340 pistons, that's what. Certain years had floating wrist pins (like the FE) and I SHOULD be able to go an extra 0.009" on the small end bushing. If there's no balancing problems due to weight, I'll have a 0.030" overbore (4.080") with 0.040" oversize 340 pistons.....and the best part....a 0.050" deck clearance. The static compression ratio will go from about 7.85:1 to almost 9.0:1 with much better quench and I can get away with a more "sporty" cam and not completely kill the cylinder pressure.
That's quite an interesting undertaking, but I like the way you think. At the end of the day parts are parts. If they fit and line up, so be it.

Actually, it's not much different than what I've been doing with the 200 Blaster. They use a factory piston with a 72.0mm diameter and then sleeve the cylinder to match. It's not what came from the Yamaha factory, but it works and bumps the displacement up to 240cc from 200cc.

Send some pics when you can. Want to see this buggy.
__________________
Bill Cohron - The Mad Doctor

Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997!
(678) 890-1110

www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!

Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
Windows™ 11 is garbage!

Much to my surprise, I'm actually quite enjoying Linux!
Reply With Quote
  #4  
Old Tue, July 5th, 2022, 01:32 PM
PHP Ward's Avatar
PHP Ward PHP Ward is offline
Super Moderator
 
Join Date: Oct 2020
Posts: 36
PHP Ward is on a distinguished road
Default

Quote:
Originally Posted by cleatus12r View Post
Oxymoron: 360 Performance

Here I am, building another engine for somebody. Whoopee.

It's a family friend, a guy a few years older than me. His dad recently died (one who gave me the 74 F250 I put a 4.6 in). The dad built a "buggy" of sorts and the son wants to restore it and have the engine rebuilt. For what it is and the severely limited use it will see, I didn't want to waste a good 390 crankshaft and set of rods......

To be continued....
I want some buggy pics as well!

-Ward
Reply With Quote
  #5  
Old Fri, July 8th, 2022, 10:32 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,654
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Here you go.
Attached Images
File Type: jpg IMG_5962.jpg (20.6 KB, 4 views)
File Type: jpg 676949912.jpg (20.7 KB, 4 views)
File Type: jpg 676993153.jpg (21.3 KB, 4 views)
File Type: jpg IMG_6027.jpg (568.1 KB, 4 views)
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
  #6  
Old Fri, July 8th, 2022, 01:38 PM
Power Hungry's Avatar
Power Hungry Power Hungry is offline
The Godfather of Power Stroke Tuning
 
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,263
Power Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud of
Default

Oh, that's fun as hell!
__________________
Bill Cohron - The Mad Doctor

Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997!
(678) 890-1110

www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!

Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
Windows™ 11 is garbage!

Much to my surprise, I'm actually quite enjoying Linux!
Reply With Quote
  #7  
Old Thu, August 18th, 2022, 09:56 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,654
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

https://rumble.com/v1gcumf-high-comp...break-in..html

https://rumble.com/v1gdoy3-high-comp...-install..html

It's nothing special but the dang engine outruns the tachometer!

For a comparison, my dad was curious what the cranking compression is compared to a regular 360. At this elevation, 95 PSI is the max for a healthy stock 360 and a lot of the goid running ones are in the 85 PSI range. After 30 minutes or so of runtime, this one is at 135 with the other spark plugs installed (so not cranking incredibly fast). I think it's a winner!
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
  #8  
Old Thu, August 18th, 2022, 12:24 PM
PHP Ward's Avatar
PHP Ward PHP Ward is offline
Super Moderator
 
Join Date: Oct 2020
Posts: 36
PHP Ward is on a distinguished road
Default

Sounds healthy!

And yea, that buggy does look fun.
__________________
- Ward

PHP Support
  • 1996 F250 7.3L
  • 1995 F150 5.8L
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:27 AM.


All Contents Copyright 2008-2024, Power Hungry Performance