Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford Super Duty & Excursion > 1994½ to 1997 7.3L Power Stroke Diesel

1994½ to 1997 7.3L Power Stroke Diesel
7.3L Power Stroke Diesel equipped F-Series and F-Super Duty.


Reply
 
Thread Tools Display Modes
  #1  
Old Sun, February 14th, 2010, 10:23 AM
majek5's Avatar
majek5 majek5 is offline
Nothin' Stock
 
Join Date: Nov 2009
Location: Northern Illinois
Posts: 209
majek5 is on a distinguished road
Default Oil Lines

Dieselsite recommends replacing the high pressure lines yearly with a chipped truck. Is this really necessary? Or just making my pocket lighter? They are great people to talk to. Has anyone blown one of these lines? I had a 1705 on my truck for about 50,000 and now a Phoenix(not many miles on that yet). Would it be beneficial to replace these? Also how about the HPX line? Good or a waste?
__________________
'06 6.0 F350 CCLB KR.

stock...
Reply With Quote
  #2  
Old Sun, February 14th, 2010, 10:39 AM
ChuckD's Avatar
ChuckD ChuckD is offline
Duty, Honor, Country
 
Join Date: Dec 2008
Location: OKC, OK
Posts: 518
ChuckD will become famous soon enough
Default

I would get a set of o-rings to keep in the truck. That is where you usually get your failure. Replacement O-rings for Ford Diesel Engines
__________________
Chuck
1992 Calypso Green Mustang notch
1995 Mustang GT
2004 Explorer Limited
A veteran is someone who, at one point in one's life, wrote a blank check made payable to 'The United States of America', for an amount of 'up to and including my life'. That is honor, and there are way too many people in this country who no longer understand it. -Author Unknown
Reply With Quote
  #3  
Old Wed, January 26th, 2011, 09:00 AM
grantlshiell's Avatar
grantlshiell grantlshiell is offline
grantlshiell
 
Join Date: Dec 2009
Location: Canada, Ontario, Wilsonville
Posts: 9
grantlshiell is on a distinguished road
Default i had one blow

i had the short one the goes to the drivers side blow 1 month after putting in my pheonix, i was running on stock when it happened. the line burst out the side at the fitting but the oring was actually fine. i had a local hydraulic place make a custom hose a little longer and the guy told me it would handle twice the pressure for less than half the price.
__________________

1996 F-250 CrewCab PHP Pheonix 40,80,smoke,idle 6" stacks, intake and guages.
2002 Excursion pheonix 80, 120
Reply With Quote
  #4  
Old Wed, January 26th, 2011, 11:54 AM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
 
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default

I have yet to loose one.

I am currently running a four line output from my Stealths, all of which have well over 150k on them. Only HPO issue I have had so far is a blown out fitting. There have been may reports of the lines blowing though.
Reply With Quote
  #5  
Old Thu, January 27th, 2011, 12:29 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,654
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

It's like automatic transmissions and powdered metal rods.....

They will or they won't. Could I be any more vague? Probably not.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:43 PM.


All Contents Copyright 2008-2024, Power Hungry Performance