|
|
|||||||
| 1994½ to 1997 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped F-Series and F-Super Duty. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Tue, July 27th, 2010, 08:27 PM
|
||||
|
||||
PCM Code
I apologize for making two of the same post. I posted this in the Phoenix section and then saw this section.
Spoke with Cody yesterday about ordering the Pheonix Chip. I am currently trying to locate my PCM Calibration code. The truck currently has an Edge programmer on it, I plugged it in and didnt have any luck seeing the code. On the wiring harness that plugs in to the computer, there was a sticker for recal. It has the numbers F7TF-TB There is also a cal code on the side of the drivers door that says 6-90A-R02. This number/letter combo seems to be correct from what I have read, but it was on the door. Everyone says it should be on the computer. Does anyone know if either of these are the codes I need to order the chip? 1996 F250 7.3L Thanks for any help. 
|
|
#2
Tue, July 27th, 2010, 10:47 PM
|
||||
|
||||
|
F7TF-TB = TDE1
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|
|
#3
Wed, July 28th, 2010, 09:05 AM
|
||||
|
||||
|
Thank you!
|
|
|
|
Linear Mode
