![]() |
|
F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Im in the middle of trying to install right now. I took the nut off to stick thru the dash and now i have 11 clicks instead if 6. Is my chip f'd?
__________________
early 99 f250/reg cab/4x4- diy intake, 4" 304ss silverline turboback straight piped, autometer gauges, mag hytec diff covers and trans pan. |
#2
|
|||
|
|||
![]()
no but you removed the pin that keeps it from stopping. so it will spend endlessly.. now you have to find where the first and last are, doh.
__________________
2002 7.3 F250 Supercab Shortbox DIY intake CCV dumped Autometer gauges WW/ATS 1.0 exhaust housing Hutch/Harpoon in tank mods/hpX line AIH delete/ebpv delete TruCool trans cooler Straight piped PHP FU ![]() |
#3
|
|||
|
|||
![]()
Well it goes all the way to the left #1 and then goes all the way right to #11.
So im ok? Does it matter as long as i dont go past the 6th click?
__________________
early 99 f250/reg cab/4x4- diy intake, 4" 304ss silverline turboback straight piped, autometer gauges, mag hytec diff covers and trans pan. |
#4
|
||||
|
||||
![]()
There is a washer below the two that are used for mounting that provides a stop or the knob.
Click the knob all the way to the left and place that washer in a position that limits you to 6 positions. |
#5
|
||||
|
||||
![]() Quote:
![]()
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory! |
#6
|
|||
|
|||
![]()
not sure where the washer went. gotta be in my dash. Got it and works awesome
__________________
early 99 f250/reg cab/4x4- diy intake, 4" 304ss silverline turboback straight piped, autometer gauges, mag hytec diff covers and trans pan. |
|
|