|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Sun, August 28th, 2011, 11:38 AM
|
|||
|
|||
FICM PROGRAMING ?
I received the programmer and found 4 ficm files on it. 2 for 03-04 and 2 for 05-07. Is it possible to use the 03-04 files on an 05 or are the ficms different ? Any benefit to using one over the other?
|
|
#2
Tue, August 30th, 2011, 03:29 PM
|
||||
|
||||
|
Yes you can, but you may end up with a U0306 code(soft code- no light) for ficm program incompatabilty. Its a harmless code though.
I like the 03 no IH program myself...for some trucks its a summer/warm weather only program.
__________________
19 F-350 6.7 Auto 16 F-350 6.7 Auto 05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM) 00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3 95 F-Superduty 7.3 DI, Auto, Mechanics Truck 94 F-Superduty 7.3 DI, 5 speed, Flatbed Last edited by Jeremy; Tue, September 20th, 2011 at 04:54 PM.
|
|
#3
Sun, September 18th, 2011, 07:28 PM
|
|||
|
|||
|
Unfortunatley I recieved the response after I had to send the programmer back. I really would like to have tried the other file. How much would it cost to purchase the programmer with the four files installed and would it be possible to switch the files back and fourth as in running one file in the winter and one in the summer ?
|
|
#4
Sun, September 18th, 2011, 10:21 PM
|
||||
|
||||
|
There is a REASON that there is an option for 03-04 and 05-07 trucks.
If you have an 03-04 truck, then DO NOT USE the 05-07 programs and vice-versa.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|
|
|
|
Linear Mode
