|
|
|||||||
| 2003 to 2007 6.0L Power Stroke Diesel 6.0L Power Stroke Diesel equipped Super Duty and Excursion. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Tue, May 8th, 2012, 05:40 PM
|
|||
|
|||
New 6.0L FICM Programmers
Anybody know anything about this new programer. My 2005 is going into the shop tommrow to replace the STC fitting and egr delete. Ive been calling PHP but knowone is answering.
Will I still need to send my FICM to be reprogramed or does this new tuner do this? Thanks Joe. 
|
|
#2
Thu, May 17th, 2012, 09:42 PM
|
|||
|
|||
|
New 6.0L FICM Programmers
With the Gryphon FICM programmer you don't need to send in your FICM. This programmer has all 4 FICM power levels at your disposal to swap in and out as many times as you want. It's also a monitor to watch up to 4 different parameters.
Very simple to use and load FICM tunes. Takes less than 2 minutes from start to finish. To load FICM tunes, remove FICM relay, plug into OBDII port, follow in screen instructions, turn key on, then off, it will ask you to remove the FICM relay if you didn't allready, select one of the tunes, download takes about 30 seconds, install FICM relay. There all done! If your ready to order the Gryphon FICM programmer, it's easier to fill out the order form on their website. They process the orders in the order they come in. If you have any other questions, just post up.
__________________
2004 F350 CC DRW King Ranch X-3 tunes by DJ,QT,GH,ID,head studs,II Stage 1turbo,ATS coolant recirc lines,Swamp's 48v ficm,coolant filter,Snow Perf stage II,EGR delete,AD2,4" turbo back straight pipe,K&N intake,Quad "A" pillar autometer gauges,Suncoast Tri Disk Conv.,Billet input shaft,Suncoast superduty rebuild kit,Trans-go shift kit,Mag-Hytec trans pan,CFM+ elbow,ccv mod
|
|
#3
Fri, July 6th, 2012, 11:20 AM
|
|||
|
|||
|
Looking to get the new Gryphon tuner
I'm in the market to get the new Gryphon tuner however i'd also like to get the ECM modifications.
Is that done with this tuner or would i need to send that in for a work-up?
|
|
#4
Sat, July 7th, 2012, 10:54 PM
|
||||
|
||||
|
Please describe what you mean by "ECM modifications".
__________________
19 F-350 6.7 Auto 16 F-350 6.7 Auto 05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM) 00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3 95 F-Superduty 7.3 DI, Auto, Mechanics Truck 94 F-Superduty 7.3 DI, 5 speed, Flatbed
|
|
#5
Fri, July 13th, 2012, 06:01 PM
|
|||
|
|||
|
The items explained on the FICM page
Power Hungry Performance - FICM Reprogramming Particularly the difference outlined in the graphs Power Hungry Performance - FICM Reprogramming http://www.gopowerhungry.com/images/...ficm_tunes.jpg
|
|
|
|
Linear Mode
