FINALLY GOT IT WORKING

martinoledad · #1 Fri, April 30th, 2010, 10:47 AM

finally got my SCT programmer working and got my custom tunes. I LOVE IT!!!! im running the 91 performance right now(with 93 octane didnt realize it until i was already pumping

) All the aggravation with this programmer was well worth it. Really woke my truck up expecially on take of, actually have some tire spin now

. Again i really appreciate all the help with everything by everybody. I will be glad to promote and tell everyone about the grpyhon and custom tuners by PHP after experiencing it first hand.

martinoledad · #2 Fri, April 30th, 2010, 11:59 AM

Hey guys i was driving around and noticed that my engine symbol was on i pulled the programmer back out and read for DTC's and got this

P0605
Internal control module
read only memory
(rom) error

is this a bad thing or is this common. or is bill going to have to rewrite something.

Thanks.

***Longshot270*** · #3 Fri, April 30th, 2010, 12:03 PM

Here is what Bill's list says about it:

P0605,"PCM Read Only Memory (ROM) error.
--Description-- The PCM ROM has been corrupted.
--Possible Causes--
- An attempt was made to change the calibration
- Module programming error
- Physically damaged PCM"

I'm not sure how bad it is but I'll go ahead and make a not on the mod board just in case.

martinoledad · #4 Fri, April 30th, 2010, 12:10 PM

well i didnt change anything on the calibrations. its a fairly new truck so i dont think the PCM is damaged so im guessing its module program error.

Thanks longshot,

martinoledad · #5 Sat, May 1st, 2010, 10:57 AM

well i got ahold of bill and he said that he forgot to turn something off in my tunes. he said that he would have them back to me fixed in 10 mins from when i called him yesterday, but i never got them. Ive been running the truck with the custom tune still but i think im going to put it back to stock. until i get the redone tunes.

***Jackpine*** · #6 Sat, May 1st, 2010, 11:57 AM

I think the only way you would get the revised tune(s) would be to set your CTS back to stock and connect it to Fusion. Did you try that?

- Jack

martinoledad · #7 Sat, May 1st, 2010, 12:02 PM

I dont have the CTS i have the SCT X3... he said he would email im guessing he mailed all 3 in one email and it was just to big because he did that the first time and he had to email them in 3 seperate emails.

***Jackpine*** · #8 Sat, May 1st, 2010, 12:22 PM

Sorry! I misread your first post. My feeble little mind saw SCT and changed it to CTS.

Hopefully, Bill will get you squared away soon. It's got to be hard for him to be doing much "tuning work" with them moving their office.

I just had to resend a file with a bunch of pictures attached to friends in two separate files because they never got them. And, I didn't get a "bounce" message either. But, sent in two files at half the size, things went through fine.

- Jack

martinoledad · #9 Sat, May 1st, 2010, 01:01 PM

yeah sounds like what had happened with Bill's email.

Kind of funny now that im thinking about it, me and bill and the fam. needs to get together and go bowling. When their family was going trough their hard times in the beginning of the year so was mine. Their moving offices im moving out of my apartment and into a small townhouse. I guess great minds think and act alike.

well i ran the truck on the flaud tune i guess you can say all day yesterday and today, because i havent had time to return it back to stock with me moving. but im going to do that now until i get the new tunes

martinoledad · #10 Sun, May 2nd, 2010, 02:51 PM

Got the emails with the revised tunes so it works again and no trouble codes.