|
|
|||||||
| 1988 to 1996 F-150 The earlier OBD-I F-150 including the 4.9L, 5.0L, 5.8L, and 460 engines. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Mon, February 15th, 2010, 11:44 PM
|
||||
|
||||
Bill, can you tune a chip for my truck?
Wow, this is about one dead little forum here. haha. just thought i'd ask if Bill could tune these 5.0's. obviously the engine isn't stock. not really even close. seeing a lot of guys using the Tweecer RT or whatever on them, but didn't know if Bill did anything with them.
__________________
Travis-- Death Row Diesel Inmate #7 1995 Ford F-250 regular cab long bed PSD MODS- 6637, TE modded 17*, Rosewood 160/80's, Tony's tunes, HPX, 120v IDM, 3" DP to 5" stacks, CPR fuel system, DRD traction bars, ISSPRO EV2's, scan guage, VALAIR full ceramic clutch, Midwest short throw shift kit 381hp/870tq 14.32 @ 97mph 
Last edited by strokin'_tatsch; Tue, February 23rd, 2010 at 12:36 AM. 
|
|
#2
Sun, February 21st, 2010, 02:30 PM
|
||||
|
||||
|
Bill mentioned that he does have a lot of 5.0L stuff so I don't know why it wouldn't be more than possible.
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|
|
#3
Tue, February 23rd, 2010, 03:56 PM
|
||||
|
||||
|
I saw that Bill can do flip chips for them so that makes me happy. need to figure out what he would suggest about taking out the EGR and smog equipment and the difference in how he would tune it. apparently the EGR comes on at idle and when the engine is cold, but i have heard of ppl having problems when they remove the EGR with the engine running poorly. i don't really want to mess around with the EGR junk, but if i have to keep it then i will. i already have the smog eliminator pulley, but i'm not really sure if i would have to do something else to keep the check engine light off. thanks for the reply.
__________________
Travis-- Death Row Diesel Inmate #7 1995 Ford F-250 regular cab long bed PSD MODS- 6637, TE modded 17*, Rosewood 160/80's, Tony's tunes, HPX, 120v IDM, 3" DP to 5" stacks, CPR fuel system, DRD traction bars, ISSPRO EV2's, scan guage, VALAIR full ceramic clutch, Midwest short throw shift kit 381hp/870tq 14.32 @ 97mph
|
|
|
|
Linear Mode
