Corey, as I type this, it is 3:34PM in Gaw-Jah. And, it is almost midnight, 11:34PM in Dubai. So, an 8 hour time difference.

- Jack

yes you are absoloutly right !! it is 11,40 now

Still waiting Bill :shrug:

I have a question .. should i have to connect the Gryphone to the truck while am trying to download the custom tunes ??

No, you first set the tune back to Level 0 (stock) in your truck. Then remove the Gryphon. On your PC, start Pegasus and then connect your Gryphon to the PC through a USB cable. If your tunes are ready, you download them by clicking on Updates->Targeted Functions.

Once that all finishes, simply unplug the Gryphon from the PC, turn your truck's ignition to ON (but do not start it) and plug the Gryphon back in to the truck. Then, you can install your new custom tune.

- Jack

yes ,.. that`s what i did !!
but still the problem is there

What error did you recieve?

Here are the screen shots of my problems...

http://i40.photobucket.com/albums/e2...untitled-2.jpg

http://i40.photobucket.com/albums/e2...ntitled2-1.jpg

http://i40.photobucket.com/albums/e2...ntitled3-1.jpg

tohi2care .. the i had posted the massage befor .. this is it

http://www.alshohooh-upload.com/uplo...8df005ef61.jpg

MX,

I am not sure where the problem is with the download.

Once again, please confirm that you are selecting [Updates] -> [Targeted Functions]. I know you have confirmed this previously, just want to make double sure.

At one point during the download (after the "Preparing Gryphon" and "Programming" status bars), you should see a Message Box that tells you to unplug the USB cable, reinsert the USB cable and then click [OK]. Are you getting to this point or does the download fail before you get the dialog? I just need to determine if the failure is during the transfer of the file to you from the server or if it is failing during the actual upload into the unit.

I'll be sitting here waiting for your reply.

Thanks.