Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   Gryphon Programmer (Disabled) (http://forum.gopowerhungry.com/forumdisplay.php?f=7)
-   -   Gryphon (http://forum.gopowerhungry.com/showthread.php?t=1428)

Jordanp252 Wed, August 12th, 2009 12:19 AM

Yeah im not sure what he was talking about when he dropped the truck off i told my wife to send me a pic of gryphon, it was on level 3, so i called him and asked if he put a higher octance in it and he said no, but he had a error code 8? I had my wife turn the gyp back to 0 until i could figure out what he was talking about, but the truck runs fine, what can i do to get it to show that code again. If I have here unplug it and plug it back in> Thanks!

Power Hungry Wed, August 12th, 2009 12:25 AM

I don't even know what an error code 8 is! The first unit error code is 0x11.

Do you think your wife would be comfortable installing it with me on the phone or is it something you'd prefer to either wait or have a shop handle with me on the phone?

What baffles me is that it was in level 3 so the vehicle obviously programmed ok, so when did the "Error 8" occur?

Let me know how I can help.

Jordanp252 Wed, August 12th, 2009 09:33 AM

Yeah I dont think the guy knew what he was talking about? He is a dealer of Edge, he said he called Customer support for edge but they wouldnt help him. I tried to tell him it was re programmed. But is it fine if my wife runs in on level 1 without changing the gear/tire setting? Im going to have her unplug it and re plug it in to see what it says. Will respond back with info.

Jordanp252 Wed, August 12th, 2009 09:52 AM

She unplugged it and plugged it back in, it said "ECM not found" then it went to the main menu screen. Is that good or bad?

Jackpine Wed, August 12th, 2009 10:42 AM

Jordan, was the ignition ON when she unplugged it and plugged it back in? It needs to be. This actually sounds to me like the Gryphon could be set to a different tune level than the truck. I know Bill can get them back together again.

Jordan, I would advise against having the tech do any more work with the Gryphon. And, It's awkward to be getting information from your Wife through you (secondhand). Bill is a VERY easy guy to talk to and I KNOW he can talk your Wife through any fixes needed. I'd take him up on that offer.

You might even have your Wife post here under your Screenname. We don't get upset over things like that. It's possible if we were able to communicate directly with the "operator" of the truck, things could get straightened out.

- Jack

Jordanp252 Wed, August 12th, 2009 11:23 AM

That sounds good, When would be the best time to have my wife give hte company a call?

Jackpine Wed, August 12th, 2009 09:28 PM

She's Central time, they're Eastern - one hour time difference. Here's a copy of their office hours: 12PM-9PM Monday, Wednesday, and Thursday; 12PM-4PM Tuesday and Friday Phone: 678-963-9913

So, after 11:00AM her time? But, PHP's phones are VERY busy. It MAY take a few tries to get through.

And, they close to phone calls during the third week of each month so that Bill can get caught up in his tuning.

She could try PMing Groovy Chick or Power Hungry too.

- Jack

Power Hungry Wed, August 12th, 2009 11:55 PM

I was out of the office all day today (Wednesday) but will be around tomorrow. She can give us a call any time after 12:00 noon or if it's easier, PM me the number and a convenient time and we'll be happy to give her a shout and walk through everything.

Take care.

Jordanp252 Tue, September 15th, 2009 07:00 AM

Just got back from iraq and was playing with the gryphon and it is AMAZING, im not sure why it was saying ECM not found but I drove it home from the airport and it was a little slugish. We stoped to eat and after that i put it on level 1 and wow you could really tell the difference, I cant wait to get some custom tunes now.

Jackpine Tue, September 15th, 2009 11:44 AM

Quote:

Originally Posted by Jordanp252 (Post 14888)
Just got back from iraq and was playing with the gryphon and it is AMAZING, im not sure why it was saying ECM not found but I drove it home from the airport and it was a little slugish. We stoped to eat and after that i put it on level 1 and wow you could really tell the difference, I cant wait to get some custom tunes now.

Great! Glad you're back safe and sound! :thumbs up yellow:

Remember, it's your Wife you want to pay attention to now, not your truck! ;)

- Jack


All times are GMT -4. The time now is 08:39 AM.


All Contents Copyright 2008-2024, Power Hungry Performance