Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) (http://forum.gopowerhungry.com/forumdisplay.php?f=32)
-   -   need help (http://forum.gopowerhungry.com/showthread.php?t=6418)

cleatus12r Thu, April 28th, 2011 10:02 AM

As long as the hex code you're using is VOAA7P6.

Heck, just take yours out and put it in his!

OneMeanStroker Thu, April 28th, 2011 01:04 PM

That would work, except I live in Omaha, and he lives in Denver. He's supposed to come out this weekend, and I'll ask him to bring his chip.

cleatus12r Thu, April 28th, 2011 02:32 PM

There ya go. Be sure to let me know how it goes...... :)

OneMeanStroker Thu, April 28th, 2011 09:46 PM

He's reluctant. Being a pain in the ***. He'd like to hear from y'all, not me. He's not 100% sold on the customer service. Plus he doesn't think since he has 40 hp split shots, that he can run fu chip. Please explain to him that he should just try my tunes, or have y'all send him the fu tunes so he can see if they work.

bill1980 Fri, April 29th, 2011 12:47 AM

took it to a shop.
 
took my truck to a diesel shop out of town today came highly recommended by some people and are good on cummins and strokers. they ran a bunch of tests. the only code stored was cam sensor error. cleared it. did some driving test and streamed it. when they were all done they went over everything with me. under hard acceleration my oil and fuel pressure was on the high side. but not out of range. my #8 cylinder injector was fluctuating some. said i should thing about replacing it. other then that they had no concerns. the cam sensor code didnt come back after testing. they didnt think this should affect my chip any. anyone have any more ideas.

Demo250 Fri, April 29th, 2011 03:21 AM

Quote:

Originally Posted by OneMeanStroker (Post 47436)
He's reluctant. Being a pain in the ***. He'd like to hear from y'all, not me. He's not 100% sold on the customer service. Plus he doesn't think since he has 40 hp split shots, that he can run fu chip. Please explain to him that he should just try my tunes, or have y'all send him the fu tunes so he can see if they work.

He has 40 Hp split shots but it's tuned for stage 2 single shots? (According to what Cody said earlier).... no wonder the superchips runs way better. Burn some regular tunes on his chip, it'll be a night and day difference. I'm sure the tunes could probably be optimized even more for his upgraded split shots.... but trying to run on tuning for stage 2 singles is clearly the problem.

Edit: Cody, I sent you a PM with a quick question.

OneMeanStroker Fri, April 29th, 2011 10:39 AM

I agree, but he wants to have the folks at PHP tell him, not me.

catman2 Fri, April 29th, 2011 06:07 PM

Quote:

Originally Posted by cleatus12r (Post 47422)
There ya go. Be sure to let me know how it goes...... :)

Not trying to be a **** Cody but you might stay on Bill's problem here as it's his thread and your chip.

OneMeanStroker Fri, April 29th, 2011 08:08 PM

That's my fault. I pulled it to the side and PM'd Cody. Sorry Bill.

bill1980 Sat, April 30th, 2011 12:28 AM

no problem. just waiting for cody or someone to respond. to many times zones apart have a hard calling him. just waiting for him to respond.


All times are GMT -4. The time now is 11:19 AM.


All Contents Copyright 2008-2024, Power Hungry Performance