Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) (http://forum.gopowerhungry.com/forumdisplay.php?f=32)
-   -   Manual tunes with an auto PCM (http://forum.gopowerhungry.com/showthread.php?t=8989)

Buffalo444 Tue, July 3rd, 2012 02:21 PM
Manual tunes with an auto PCM
 
I'm converting my 96 F-350 to a manual, but retaining the auto PCM. Is it possible for you guys to tune my PCM properly?

Buffalo444 Wed, July 4th, 2012 10:05 PM
Another thing, would you guys be able to tune a set of 465/200%'s to run like stage 1.5's with a stock turbo and HPOP until I could do supporting mods?

cleatus12r Thu, July 5th, 2012 12:05 AM
Quote:
Originally Posted by Buffalo444 (Post 59678)
Another thing, would you guys be able to tune a set of 465/200%'s to run like stage 1.5's with a stock turbo and HPOP until I could do supporting mods?
There is ZERO reason to run a 465cc injector with 200% nozzles. You'll never empty them in the time allowed. You're looking at a minimum of 300% nozzles to use all of that fuel.

Buffalo444 Thu, July 5th, 2012 10:28 PM
Quote:
Originally Posted by cleatus12r (Post 59681)
There is ZERO reason to run a 465cc injector with 200% nozzles. You'll never empty them in the time allowed. You're looking at a minimum of 300% nozzles to use all of that fuel.
Not looking to use all the fuel. Looking to get good, reliable, atomization and have a good fuel cushion for the plunger.

cleatus12r Thu, July 5th, 2012 10:41 PM
Quote:
Originally Posted by Buffalo444 (Post 59694)
Not looking to use all the fuel. Looking to get good, reliable, atomization and have a good fuel cushion for the plunger.
To each their own.


All times are GMT -4. The time now is 10:49 PM.


All Contents Copyright 2008-2024, Power Hungry Performance