Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   1999 to 2003 7.3L Power Stroke Diesel (http://forum.gopowerhungry.com/forumdisplay.php?f=25)
-   -   Gryphon Guage (http://forum.gopowerhungry.com/showthread.php?t=917)

jerry edwards Wed, April 8th, 2009 05:42 AM
Gryphon Guage
 
Is there a way to delete the MPH and RPM off the Gryphon and put EGT,EOT,TFT,and BST instead?If possible how can it be done?

JWBFX4 Wed, April 8th, 2009 10:46 AM
In order to change the display items, Push menu, go down to setup(hit enter),then hit enter for display, then go down and hit enter on the one that says 4 (function?). Then after that just select one to change, and then scroll through the parameters and pick the new one you want. And then repeat this last step for the next 3.

jerry edwards Thu, April 9th, 2009 03:50 AM
Guage
 
Every time I set it up,it won't get ride of the mph and rpm,I can put any other 2 things on.

muns53 Tue, April 14th, 2009 11:30 PM
I'm monitoring these:

EGT (uppper left)

Boost (lower left)

Tranny temp (upper right)

Oil temp (lower right)

I followed the instructions in the manual to get me to this point. Good luck!

88Racing Tue, April 14th, 2009 11:55 PM
Quote:
Originally Posted by JWBFX4 (Post 7429)
In order to change the display items, Push menu, go down to setup(hit enter),then hit enter for display, then go down and hit enter on the one that says 4 (function?). Then after that just select one to change, and then scroll through the parameters and pick the new one you want. And then repeat this last step for the next 3.
Make sure you go to done or set display and hit enter not menu and I did this once and my selection was not saved to the location.

Lars


All times are GMT -4. The time now is 04:57 AM.


All Contents Copyright 2008-2024, Power Hungry Performance