Quote:
Originally Posted by th3godf4th3r
ok thanks, i set it at 65.
is that all?
also i dont know if anybody can help out about this but the gryphon is showing i have 2 DTC's
1. P0480 Fan 1 Control Circuit
2. P0528 Fan Speed Sensor Circuit No Signal
i dont get where i would check for this, i have the harness connected that connects to the fan and there is nothing else unplugged
any ideas?
|
Try clearing the codes to see if they come back.
Make sure all connections are tight.
Check to make sure there isn't a magnetic pickup sensor on the old waterpump pulley.
I haven't dealt w/ to many 2008's yet.
Lars