Quote:
Originally Posted by bart_r6
Thank you. I just finished updating the pegasus...it work ok now.
What do i have to do now to upload the custom tunes from the e-mail to the gryphon? Thanks
|
Using Pegasus to update your hardware.
--------------------------------------------------------------------------------
In order to update your Gryphon, the first thing you need to do is make sure that you have installed the Pegasus Update Client. Here is the download link:
http://www.powerhungryperformance.co...v2_01_0575.exe
You may also want to download the Quick Start Guide at:
http://www.powerhungryperformance.co...user_guide.pdf
Once installed, run the Pegasus application. Always make sure you have the latest software version by going to [Updates] and then [Pegasus Update Manager]. If there are any updates available, you will be notified. If not, then continue on.
To update your Gryphon with CUSTOM files, follow these simple steps:
Make ABSOLUTELY SURE you return the vehicle back to stock before going any further. In most cases an update shouldn't be allowed unless the programmer is back to stock, but some early versions had a firmware bug that may cause the all the data on the unit to be lost when trying to update while still programmed.
Connect the programmer to the USB cable.
From the main Pegasus screen, select [Updates] and then [Targeted Functions] to begin the custom download.
Follow any on-screen prompts to disconnect/reconnect the USB cable. Later versions don't usually do this, but early versions do. Make sure to read all messages before clicking [OK].
Once the update is complete, you may remove the USB cable and return the unit to your vehicle..
