Thread: display freezing up
View Single Post
  #6  
Old Wed, June 24th, 2009, 01:09 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
  
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default
Quote:
Originally Posted by 88Racing View Post
Just had a BF(brain fart) from my old stereo install days.

Banks are you running a trailer braking device?

If you are maybe the OBII cable is to close to the out put and if it is it should not be running in close proximity and parallel(=) to it. Need to get one or the other away from each other and or run the cables perpendicular.(+)

Just a thought!

Lars
What a heck of a good idea, Lars! My two leads are about 6 inches apart and they ARE perpendicular to each other. But, I've seen pictures of some people's break controller mounted down low on the left side of the steering wheel. That just about guarantees a short parallel cable run.

Mines up higher on the right side, on the lower trim panel of the dash.

- Jack