In most applications, we can set up a spare PCM with the same tuning we offer in a standard programmer. Then all you have to do is swap it out at your convenience. The catch is that we need a valid copy of the VID block in order to have it work in the spare PCM and have all the build options correct. The best way to get this is to send in the PCM for a read but this is often too inconvenient to be practical. We can usually take an educated guess on the build based on VIN information the current options (tires, gear, 4wd, etc.) that are installed on the vehicle.
I hope this helps.
__________________
Bill Cohron - The Mad Doctor  
Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997!
(678) 890-1110
www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!
Bring back  Windows™ XP and 7. 
Windows™ Vista and Windows™ 8 is a pain in my a$$! 
Windows™ 10 is only slightly less annoying! 
Windows™ 11 is garbage! 
Much to my surprise, I'm actually quite enjoying Linux! 
|