Thread: Smoke Control
View Single Post
  #4  
Old Thu, January 28th, 2010, 10:58 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
It's a multiplier.

It "basically" takes the desired PW for a given ICP/MFD (in the pulse width map) and multiplies it by the value in the multiplier.

So by all rights, you can either jack up the values in the straight pulse width map to reflect what you want the PW to be for a given MFD/ICP that is not based on EOT so you can really churn out the powah upon first startup on a -10F day........

OR

You can calculate (within fairly close reason) what the actual PW will be if you do some math. The PW multiplier map allows injection pulse width changes based on EOT instead of just allowing a ton of fuel while the engine is cold.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Reply With Quote