Thread: Looking for chip, so some questions...
View Single Post
  #11  
Old Wed, March 31st, 2010, 08:54 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Quote:
Originally Posted by MtPaul401 View Post
Sounds good then. What would be a good 4th position to have? I'll fill up 2 places with the mod stock and anti theft, way as well go for 6 positions I guess. Not sure I'd use a 4th position but who knows....

BTW, thanks for all the answers to some probably dumb questions,I'm pretty ignorant about so much of this stuff.
Don't worry, I think we've all started out ignorant about this stuff. Heck, I even bought Banks stuff when I got my first PSD.

4th position? I don't think PHP charges for a high idle calibration and I've found that I really can't live without a high idle position anymore. I was hooked the first time I used it. The heater stays warmer in the winter due to increased coolant flow through the heater core and the A/C stays cooler in the summer due to increased airflow (from the cooling fan) through the A/C condenser. You probably know Montana well....-30 in the winter and 100+ in the summer.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.