Dane,
I'm glad we were at least able to get you running last night.
When you go back to the dealer to get the PCM reflashed, just remove the programmer from the vehicle.
Once the dealer has everything cleared out and reset, just reinstall your programmer and you should be good to go. All your custom tunes are already loaded so you will not need to update any further.
88,
The programming failure was not Dane's fault. For some reason the PCM didn't write properly when he went back to stock. When he updated the unit it wiped out his original VID and PATS so I couldn't do a complete recovery on the PCM and instead had to put a modified program to disable the PATS so the vehicle would be drivable. It would have helped if we'd have caught that failure before the unit was updated, but not much to do about that now I suppose.
__________________
Bill Cohron - The Mad Doctor  
Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997!
(678) 890-1110
www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!
Bring back  Windows™ XP and 7. 
Windows™ Vista and Windows™ 8 is a pain in my a$$! 
Windows™ 10 is only slightly less annoying! 
Windows™ 11 is garbage! 
Much to my surprise, I'm actually quite enjoying Linux! 
|