Thread: Lope idle
View Single Post
  #3  
Old Mon, April 26th, 2010, 09:13 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
You will want to datalog IPR Duty Cycle, Injection Control Pressure PSI, Mass Fuel Desired, and RPM.

Set up the 4-graph or Live Data grid, set your sensor input range (configure active sensor) at the bottom of the drop down sensor menu.

IPR Duty cycle - 4% to 100%
Injection control pressure - 450 PSI to 3000 PSI
Mass Fuel Desired - 0 to 100
RPM - 0 to 3000

Use the "Data Logging" tab at the top and press "record" while it's doing it's thing.

Then when you're done, you can save it and then email it.

See page 61 of the manual in the "help" tab on the top.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.