Thread: Injectors
View Single Post
  #2  
Old Wed, May 5th, 2010, 05:15 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

First off, I don't have any personal experience with diesel care/performance, but a lot of people have been burned with sub-par quality.

Your best bet is to have a set of flow-matched remanufactured injectors from someone like Jim Rose at Rosewood diesel DIY-Injectors.com or Dave Armstrong at Swamps diesel Swamp's Diesel Performance . You won't get higher quality anywhere and you won't have to worry a bit.

You will need new tunes written for single shots, but you won't be wondering whether or not you did the right thing afterward.

Stage 1s do not have a larger nozzle than stock. The nozzles are stock size but the injector volume is increased for more fuel delivery when needed. These are by far one of the better ways to go with a near-stock truck.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Reply With Quote