To get the wastegate actuator rod as short as it needs to be, you'll have to trim about 3/8" off of the threaded rod.
Yes, the Ford dealer will have the donuts...and they're pretty cheap. My money says you might as well buy new pipes as well because they'll actually be worn out where the donuts ride and they won't seal even with new donuts.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|