Thread: Early '99 pcm- swap it or no
View Single Post
  #4  
Old Mon, June 21st, 2010, 02:09 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Is your truck CA emissions? If not, you shouldn't have too much difficulty finding a PCM.
If it is a CA truck, I can only wish you luck. We can reflash the PCM if it is or isn't depending on what you have and what you come up with as far as a used PCM goes.


In all actuality, ebay has always been my friend and as long as you know what you're looking for, you can usually get them for a hundred bucks or so.

The other option is NAPA. I think the last one I bought was $189...you just have to give your old one to them. It won't be a "fair" trade, but they won't know the difference. I'm not condoning being dishonest, but if you order a PCM from them, make sure you get the "DPC-422".
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Reply With Quote