Thread: Going to rebuild the drive shaft
View Single Post
  #1  
Old Mon, March 28th, 2011, 10:18 AM
rammertide07 rammertide07 is offline
God & Guns
  
Join Date: Dec 2010
Location: Rogersville, AL / Currently in Pollock, LA
Posts: 305
rammertide07 is on a distinguished road
Default Going to rebuild the drive shaft
Any how-to links on how to rebuild the driveshaft? Parts list?

I've been having a vibration at any speed, doesn't matter if I'm in gear or coasting in neutral, accelerating or not. Vibration is less noticeable at higher speeds though. I got under my truck yesterday and noticed the carrier bearing was ****ed at a 10-15 degree angle and I could press it up and down pretty good bit. So I've decided to rebuild the entire drive shaft. Do I need anything other than the carrier bearing and the 3 u-joints?

Also, on the carrier bearing...is it just he bearing that gets replaced or the cover too?

thanks
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
Reply With Quote