|
|
|||||||
| New Member Introductions
Welcome to the Power Hungry Performance Forum. We're glad that you're here! Start a new thread and tell us a little about yourself! PLEASE POST TECHNICAL and/or SUPPORT QUESTIONS in the APPROPRIATE SECTION of the FORUM |
 |
|
|
Thread Tools | Display Modes |
|
#1
Mon, February 15th, 2010, 04:38 AM
|
|||
|
|||
New and looking to switch tuners
Alright im looking to change who custom tunes my truck! i am really looking for customer service more than anything because i do change my mods quite a bit. I want to get it all dialed in over the phone and not have to live tune quite yet!
Also wanting to check into a chip burner possibly. So what are your prices on new tunes on my ts 6pos. and a chip burner?
__________________
96' f350 on 35's stage 1's, custom tuned, built tranny, IC, modded IDM |
|
#2
Mon, February 15th, 2010, 08:50 AM
|
||||
|
||||
|
You're probably looking at the FU package (but you have aftermarket injectors so you might be looking at the FU2 package) minus the purchase of a new chip. You will have to send your old chip in to get it reformmatted so it will work with the Burner that Bill sells.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#4
Mon, February 15th, 2010, 10:36 AM
|
||||
|
||||
|
WELCOME
__________________
 crew cab 4-wheel drive 03 f-250 6 uh oleaker.4 inch staight pipe..12 years of being a diesel tech..i love helping others..feel free to call with any concerns..706-244-4955 got the truck put back to factory tuning the day she rolled of the factory line, TEC3..ficm,tcm,ecm...php is the best
|
|
#5
Mon, February 15th, 2010, 03:37 PM
|
|||
|
|||
|
Quote:
I want to do that but the website is kind of confusing. Yes i will be doing a turbo and hybrids later on so i guess the F.U. 2 is definitely what I need. Not sure if i need a burner or not though. I just want to get my truck all dialed in perfect in some way, with my current tuner its much to hard to get in contact with him and stuff takes forever. Even though i do like his tunes quite a bit. So im just gauging my options as to switching!
__________________
96' f350 on 35's stage 1's, custom tuned, built tranny, IC, modded IDM |
|
#6
Mon, February 15th, 2010, 08:14 PM
|
||||
|
||||
|
The FU2 package comes with a burner because Bill will make the tunes for you and put them on his server to be downloaded to your computer and into the burner when you want to switch tunes.
Without the burner (NOT the FU2 package), Bill will charge you $60/tune and put them on the chip himself if/when you decide to have him tune it. The big issue there is time to ship the chip to him and get it back every time you change something.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#7
Mon, February 15th, 2010, 10:05 PM
|
|||
|
|||
|
Welcome
|
|
|
|
Flowmaster 40, PHP Gryphon, AS 2" kit
Linear Mode
