|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Tue, August 16th, 2011, 09:00 PM
|
|||
|
|||
program a "blank" FICM?
Hello, my 05 f-250 is beginning to have lower voltage from the ficm ( fluctuates between 42 and 48 volts) so I am going to replace it. If I get an new/reman from ford that is not programmed at all, will that present any problem for PHP to flash it with their tune. I also would like to send in my ECM for a rollback to the original (or better) tune as it got about 1 or 2 mpg better on the highway before the "recall" flash. As I understand it, having both the ecm and ficm flashed by PHP would give the best gains? Thanks, jim
|
|
#2
Tue, August 16th, 2011, 11:38 PM
|
||||
|
||||
|
No problem whatsoever. Fill out the appropriate order form and shipping form then send both boxes our way!
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
|
|
Linear Mode
