![]() |
|
1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
getting the code off of the pcm looks extremely difficult. Does any one have any tips on how to do this on a 99 f350
|
#2
|
||||
|
||||
![]()
Man, it's EASY!
The PCM code is on the driver's side of the PCM connector on the firewall just below the brake master cylinder! Using one of these: ![]() Look between the inner driver's side fender and this connector: You will see this (but backwards in the mirror): ![]() It should take you less than a minute to see the PCM code. If it were me I would just take the PCM out right now and get the PCM code then order the Phoenix. Since it will be out you can take it apart, clean off the contacts, and cut a hole in the black plastic PCM carrier so that when your chip arrives you can just slap it in.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
#3
|
|||
|
|||
![]()
thanks, very helpful
|
![]() |
|
|