|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Tue, February 7th, 2012, 09:25 PM
|
|||
|
|||
Do I need to take out my PCM?
Hey guys and gals , first post here.
DoI need to take out my PCM for the install of the Phoenix chip? I'm trying to read the numbers on it and I don't know if the numbers are underneath the harness, so I should take off the 10 mm bolt and take the harness off the PCM to see the sticker to read the PCM code or not. If I need the PCM out for the chip install then I'll just pull the whole thing out , read the numbers and order my Phoenix chip. My dealer has a sticker in the engine bay that reads Installed new PCM. numbers are XV 22 12A 650RD Is this enough info to order a Phoenix chip? Thanks Patrick. 1999.5 Super Duty 7.3 |
|
|
Threaded Mode